HS Code: 28332200

Aluminum Sulfate, with the molecular formula Al2(SO4)3, is a mineral substance that is seen in the form of white crystals or powder. This chemical compound is non-flammable but and non-volatile. This aluminum salt is also known as alum, and when mixed with water, it changes the pH of the solution to acidity.

HS Code: 31022100

Ammonium sulfate is an inorganic sulfate salt obtained by reaction of sulfuric acid with two equivalents of ammonia. Ammonium sulfate is used as a fertilizer for alkaline soils and it is also used as an agricultural spray adjuvant for water-soluble insecticides, and fungicides. Growers apply ammonium sulfate primarily where they need supplemental N and S to meet the nutritional requirement of growing plants. Since ammonium sulfate contains only 21 percent N, other fertilizer sources more concentrated and economical to handle and transport often make a better choice for N-deficient fields. It provides an excellent source of S, which supports or drives numerous essential plant functions, including protein synthesis. Ammonium solfate general Information

Ammonium solfate Properties

Ammonium solfate specification

HS Code: 291631

Benzoic acid is produced commercially by partial oxidation of toluene with oxygen.

Benzoic acid and its salts are used as food preservatives, represented by the E numbers E210, E211, E212, and E213. Benzoic acid inhibits the growth of mold, yeast and some bacteria. Benzoates are high solvating plasticisers for PVC, available as either monobenzoates (benzoates) or dibenzoates. They are mainly used in PVC plastisol applications including flooring and film, but also in adhesives and sealants In medical applications, Benzoic acid is a constituent of Whitfield's ointment which is used for the treatment of fungal skin diseases

Sodium Benzoatc-Food gradc

HS Code:2714

Bitumen is a black, sticky and pasty substance that is used in insulating moisture and making asphalt. There are different types of bitumen, each of which has a specific application. Bitumen is a petroleum derivative and is often produced in an oil refinery.

HS Code:290943

Diethylene glycol (DEG) is an organic compound. This compound is a colorless, odorless, non-toxic, hygroscopic liquid with a sweet taste. This material is miscible in water, alcohol, ether, acetone and ethylene glycol. DEG is a widely used solvent.

HS Code:29153100

Ethyl acetate, a colorless organic compound with a pleasant fruity aroma, has found its way into various industries due to its unique properties. Its versatility, low toxicity, and excellent solvent capabilities have made it a popular choice for a wide range of applications same as paints and varnishes, printing Inks, adhesives, thinners and paint strippers, nail polish removers and also pharma manufacturing. Ethyl Acetate Plants are designed mixing acetic acid and ethyl alcohol.

HS Code:34021190

Sulfocid is an economical and versatile, biodegradable anionic surfactant. This product can be neutralized with a variety of inorganic bases and organic amines to give a wide range of sulfonates with the properties of your choice. Sulfocid can be used to make both liquid and dry products. It is an effective surfactant in acidic environments. Sulfocid contains a minimum of sulfuric acid and upon neutralization produces material with little salt, light color and low odor, allowing wide latitude in formulations

HS Code: 29183040

Methyl acetate is a neutral and colorless liquid with an ester-like odor. This substance is also known as methyl ethanoate or acetic acid methyl ester. The production line of this material with a purity of 85% is active and is continuously produced and sold. Methylb acetate is produced by reacting methanol with acetic acid and then distilling the final product. Applications of methyl acetate:

1. Solvent for nitrocellulose and for cellulose acetate

2. Preparation of paint, lacquer, thinners and strippers

3. To manufacture artificial leathers

4. Perfume industry

5. Organic synthesis

HS Code: 29051100

Methanol (CH3OH) is a simple one-carbon alcohol that is a colorless and tasteless with a faint odor. Other names are Methyl-alcohol and Wood-alcohol. It is most commonly produced from natural gas but can also be derived from renewable bio- feedstocks and from coal through gasification. colorless liquidAppearance:

BulkDelivery:

transportation:andStorage It can be stored and transported in carbon steel tanks with a suitable coating or stainless-steel tanks. Usually shipped via road by 25,000-liter tankers

Application:

- Production of all kinds of polymers by MTO technology

- Production of formaldehydes (formalin) for production of resins

- Production of M.T.B.E to improve the quality gasoline (fuels optimization)

- Production of DME, dimethyl ether

-Production of solvents and antifreeze

Production of acetic acid

- production of acetates such as methyl acetate, ethyl acetate, etc.

- Considering the foreseeable shortage of energy resources in the future, the direct consumption of methanol as a clean & green fuel or in the production of hydrogen for fuel cells is of great interest, which is known as one of the new uses of methanol.

HS Code:29024400

Mixed xylene is a colourless, flammable aromatic hydrocarbon liquid with a sweety odour. It is a mixture of different isomers of xylene such as meta-xylene, para-xylene, ortho xylene and ethylbenzene. Mixed Xylene is used as a solvent in many industries, such as paints and coatings, pesticides, printing, rubber & leather, etc. It can be used in place of toluene where slower drying process is desired. Mixed Xylene is a widely used solvent and is considered to be fit to be used as a solvent in paints, pesticides and other products due to its better adhesive properties.

HS Code: 39072090

Polyethylene glycols (PEGs) are condensation polymers of ethylene oxide and water with the general formula H(OCH2CH2)nOH. They are the most commercially important type of polyether. The low molecular weight compounds up to 700 are colorless, odorless viscous liquids with a freezing point from -10˚C (diethylene gycol), while polymerized compounds with higher molecular weight than 1,000 are wax like solids with melting point up to 67˚ C for n=180. While PEGs with different molecular weights find use in different applications and have different physical properties (e.g. viscosity) due to chain length effects, their chemical properties are nearly identical.